Deleting a run method
Note:
If your instrument requires log in, you must have User or Administrator level permissions to
delete a run method.
To delete a run method:
1.
Log in as a user with User or Administrator access.
2.
In the
Browse Run Methods
screen, find the run method you want to delete.
3.
Select the run method, then select
Delete.
4.
In the dialog box that opens, verify the deletion.
5.
Select
Yes
in the message box.
The run method is deleted.
Designating a run method as the default
The run method that is designated as the default method is used as the starting point for all new
methods. The Veriti
™
Thermal Cycler uses the General PCR run method (shown in “General PCR Run
) as the default, unless you change to another method.
IMPORTANT!
If your instrument requires login, you must have User or Administrator level permissions
to set the default run method. Only a run method in the Shared folder can be set as the default method.
To designate a run method as the default:
1.
Log in as a user with User or Administrator access.
2.
In the
Main Menu
screen, select
Settings Menu.
3.
In the
Settings Menu
screen, select
Set Default Method.
The
Set the Default Run Method
screen is displayed, with only the run methods in the Shared
folder displayed.
4.
Select the run method you wish to designate as the default in the
Set the Default Run Method
then select
Make Default
. Select
OK
in the message box that opens.
The
Settings Menu
screen opens and the selected run method is now the default.
Chapter 1
System overview
About run methods
1
18
Veriti
™
Thermal Cycler User Guide