Operating and installation instructions
08.02.2021 – Version 1.1
Dry cooler
X-TDH.3-100-22-G-N-D5-BC-04
Page: 28/31
Operating and installation instructions for dry cooler translation into English © thermofin GmbH
7. INSPECTION AND MAINTENANCE
Depending on type, installation and environmental conditions, the heat exchangers are
subject to different signs of wear and contamination during operation. In order to ensure an
excellent operation and a maximum operational reliability, periodical maintenance measures
must be executed.
Maintenance and repair measures as well as recurring inspections should comply with the
valid standards and statutory provisions, e.g. EN378, 517/2014EС, VDMA 24243,
2006/42EС, 2014/68/EU, EN 60079
-17 and/or local factory standards or regulations
applicable at installation site.
Measures that result from the documents of the installed fans, attachment parts and
electrical components must be carried out. See the operating and maintenance manuals
included in the scope of supply.
The following table under point 7.1 can serve as a general recommendation.
NOTE
