- 26 -
7.1.2
CONTROLLER COMPONENTS
Figure 05: Controller scheme
7.1.3
SELECTING A PROGRAM
Push the PROGRAM button
until the required program number
appears on the display in the top left corner.
Example for program number 5: “P5”
The controller shows the maximum temperature of the selected
program in the bottom line. While selecting a program, do not
activate any other button.
Figure 06: Controller
The illustration above changes after only a few seconds without
pushing any keys and displays information about the program
segment with the highest temperature.
Push the START-STOPP button
when you are sure that you have
selected the correct program.
