Thermo Scientific Vanquish VF-D20, Operating Manual, Page: 56 / 182

5 • Installation
Page 56 Vanquish Charged Aerosol Detectors Operating Manual
5.5 Setting Up the Hardware
This section describes how to set up the hardware and provides
information about the detector connectors and cables.
5.5.1 System Arrangement
The detector is part of the Vanquish system. The system modules are
typically arranged in a system stack, with the arrangement depending on
the system configuration.
Figure 8: Vanquish system, configuration with charged aerosol detector
and diode array detector (example)
No. Description
1 Solvent Rack
2 Charged Aerosol Detector
3 Diode Array Detector
4 Autosampler
5 Pump
6 System Base
7 Column Compartment