Thermo Scientific Vanquish VF-D20, Operating Manual, Page: 42 / 182

4 • Unpacking and Transport
Page 42 Vanquish Charged Aerosol Detectors Operating Manual
9. Some surfaces including the doors of the detector are covered by a
protective film during shipment. Remove the protective film from all
surfaces as applicable.
Moving the Detector after Installation
If you have to move the detector after it has been set up and installed in
the Vanquish system, prepare the detector for transport and move it to
the new location. Follow the instructions in
section 7.12 Transporting or
Shipping the Detector, page 142 .