Thermo Scientific Vanquish Charger, Operating Manual

Page: 45 / 88

6 • Operation
Vanquish Charger Operating Manual Page 45
6.3 Control Elements
The Charger is designed to be operated from a computer running with
the chromatography software.
In addition, status indicator LEDs on the front panel of the Charger
provide a quick visual check of the operational status of the device.
6.3.1 Status Indicators
The status indicator LEDs at the front side of the Charger provide
information about the device status.
LED Status Description
Power LED Off
Green Indicates the overall power status of the
Charger. The LED is green when device
power is on and unlit when power is off.
Mover Status LED Off
Green blinking
Green
Red Indicates the status of the Charger mover:
The LED is unlit when the mover motor
power is off.
Green blinking: the mover is performing a
command from the software, a start-up
routine, or an inventory scan and is
therefore not ready
Green: mover motor power is on and the
mover is ready to move; it is safe to open
the door during this time
Red: the mover is in error state
Connect/Equil LED Off
Yellow
Green blinking
Green Indicates the connect status and
equilibration status of the Charger. The LED
is unlit when the Charger is not connected
to the software.
Yellow: the Charger is connected to the
software, temperature control is turned off
Green blinking: the Charger is connected to
the software and equilibrating (target
temperature has not been reached)
Green: the Charger is connected to the
software, and the target temperature has
been reached.