Thermo Scientific UCI-100, Operating Instructions Manual, Page: 35 / 62

Universal Chromatography Interfaces
UCI-50 and UCI-100
Operating Instructions Page 29
• Module Address
Click
Browse
to select the module address of the UCI. (The button appears dimmed if
the Demo Mode is enabled.)
Fig. 14: Device list
The following information is displayed:
• The Address column lists all UCI modules that are available via Ethernet (TCP/IP)
together with their IP address and/or all UCI modules that are available via USB
with the prefix 'USB' and their serial number.
• The
Server Name
column indicates whether a UCI is already connected to a
Chromeleon server PC. If a UCI is available for connection to the server, the entry is
0.0.0.0 or the column is empty.
• The S/N column shows the serial number of the UCI.
• The Ethernet column shows the Ethernet address of the UCI.
Double-click the UCI that you want to use. The address is automatically entered in the
Module Address
box. Clicking OK establishes the connection to the module. This
process may take some seconds. As soon as the connection has been established
successfully, the related Connect message including the firmware version is displayed in
the audit trail.
Tip: A UCI module can be connected to only one chromatography server.
However, its interfaces and signals can be shared among several timebases
(Shared Device; → page 33).
• LAN Timeout
You can specify a
LAN Timeout
between 1 and 30 seconds. For LAN connections with
high network traffic, this setting allows prolonging the timeout for the communication
between the Chromeleon server and devices that are connected to the RS-232 port of the
UCI.