26 | Touchscreen Controller Display Functioning
Medical Devices -Touch Controller
Data Backup from USB
This menu is useful to run a monthly backup of the
temperature data by means of a USB. Access to the
dedicated page by touching on
and then on
icon.
This is the page that will be visualized:
Enter the month/year you desire to copy, touch the
following icon
and follow the described procedure
that will appear in the screen.
Inside of the USB a folder with all the registered data will
be automatically created. The name of the folder is a
particular code which identifies the equipment;
therefore, it is possible to load in the USB different
backup of different equipment.
System Panel Setup
Touch icon
and then
to access to software
panel setup menu. In this menu the user has the
possibility to customize some specific functions of the
equipment.
CAUTION:
If date/hour has been changed
(for example, this might happen when civil time
is changed to solar time and vice versa),
there might be data loss while downloading
data from USB. Therefore, we advise to
backup data from SD CARD
(see
Temperature Data Backup from SD
).
We advise to use the SD Card for the first
download of data in order also to install the
software Capture 5.2 provided free in SD
CARD (see
)
bck
12345
_1_12
Backup
Serial
number
Month
and Year
To modify the internal light
brightness (from 0 to
100%)
To modify the brightness
of the display (MAX during
the equipment
functioning, MIN when
screensaver or Night and
Day function are enabled)
To activate
screensaver each (h) hours
(from 1 to 12 h or never)
To activate or deactivate
the USER PASSWORD
SETUP (to activate and
deactivate PSW: 0000).
The generic password is
then 1234. To change this
password see
To setup day and hour for
the system SMS (only
when GSM Communicator
is installed)
To activate
“Easier
accessibility”. This
function will increase in
homepage the dimension
of key and light.
Date in which battery was
installed the last time.
