Thermo Scientific thermoscientific Vanquish Pumps C, Operating Manual

Page: 200 / 296

8 • Troubleshooting
Page 200 Pumps C, Pumps F ( VC-Pxx, VF-Pxx)
Operating Manual
8.2 Messages
This section provides information about the messages that may appear
in the Chromeleon Audit Trail during operation of the pump. For easier
identification of the source for a problem, note the
Device information
that may appear in front of the message:
Device Information Description
[Main Device Name] With messages relating to the entire pump, for example, to
the leak detection, main board or with a communication
error
[Pump Device Name] With messages relating to the entire flow unit, for example,
to the system pressure
[Pump Device
Name]_
Wellness_RightBlock With messages relating to the right pump block or
components in the right pump head, for example, the
pistons or check valves.
[Pump Device
Name]_
Wellness_LeftBlock With messages relating to the left pump block or
components in the left pump head, for example, the pistons
or check valves.
The Device Names are specified in the dialog box for the pump in the
Instrument Configuration Manager. The default names are:
Pump Device Name Default Name
Binary pump,
Isocratic pump,
Quaternary pump [Main Device Name] PumpModule
[Pump Device Name] Pump
Dual Pump Main [Device Name] PumpModule
Left [Pump Device Name] PumpLeft
Right [Pump Device Name] PumpRight
The table lists the most frequently observed messages for the device
and provides troubleshooting assistance.
Each message consists of a code number and a text. The code number is
the unique identifier for the problem while the wording may change.
Note the following:
• To facilitate finding a message, the table lists the messages sorted by
code.
• If you cannot find the code you are looking for, check the message
text. The two messages "Unexpected module behavior" and
"Module malfunction detected" can be assigned to different codes.
See the beginning of the table for more information.