Thermo Scientific Thermolyne NCAT F85930, Installation And Operation Manual

Page: 8 / 94

Warnings alert you to a possibility of personal injury.
1
Safety Information
Alert Signals
6 NCAT Asphalt Content Tester Thermo Scientific
Alert Signals
Cautions alert you to a possibility of damage to the equipment.
Notes alert you to pertinent facts and conditions.
Hot surfaces alert you to a possibility of personal injury if you come in contact with a
surface during use or for a period of time after use.
We do not condone the use of this product for the purpose of cleaning glassware,
such as rolling thin film oven bottles. Prior to ignition, the asphalt in these bottles
will liquify and may flow into the lower control section of this product, causing
severe damage or fire.
This manual contains important operating and safety information. You must carefully read and
understand the contents of this manual prior to using this equipment.
Your NCAT Asphalt Content Tester has been designed with function, reliability and safety in mind. It
is your responsibility to install it in conformance with local electrical codes. For safe operation, please
pay attention to the alert signals throughout the manual.
Warnings
To avoid electrical shock:
1. This furnace must be installed by a competent, qualified electrician who ensures compatibility
among furnace specifications, power source and servicing.
2. Disconnect from power supply before servicing.
3. Ensure that the furnace is not connected to the power supply prior to installing or removing the
balance.
4. Ensure that the door switch is operating properly.
To avoid burns:
1. Do not touch the exterior or interior surfaces of the chamber or exhaust area when chamber is hot.
“Hot Surface. Avoid Contact with Chamber Area”.