Thermo Scientific Thermo Scientific Vanquish VC-D40, Operating Manual

Page: 79 / 174

6 • Operation
Variable Wavelength Detectors (VC-D40, VF-D40)
Operating Manual Page 79
MUTE ALARM
Beeping alerts you when the device detects a problem, for example,
leakage. To turn off the beep for the current alarm, press this button.
Eliminate the source for the alarm within 10 minutes. Otherwise,
beeping starts again. If the device detects a different problem, beeping
alerts you again immediately.
UV
The UV button allows you to turn the UV lamp on and off directly from
the detector. To turn on the UV lamp, press the UV button.
The LED next to the button indicates the lamp status:
LED Description
Off (dark) The UV lamp is turned off.
Green, flashing The UV lamp ignites.
Green The UV lamp is turned on.
VIS
The VIS button allows you to turn the VIS lamp on and off directly from
the detector. To turn on the VIS lamp, press the VIS button.
The LED next to the button indicates the lamp status:
LED Description
Off (dark) The VIS lamp is turned off.
Green, flashing The VIS lamp ignites.
Green The VIS lamp is turned on.
When the device is connected in the Chromeleon software
The button functionality is as follows when the device is connected in
the Chromeleon software:
• No injection or sequence or baseline monitoring is running:
All functions are available from the keypad.
• An injection or sequence or baseline monitoring is running:
The
MUTE ALARM function remains available from the keypad,
allowing you to turn off the beep for the current alarm.
6.3.2 Status Indicators
The status LED bar on the front side of the device and the STATUS LED
on the inside keypad provide information about the device status.