Thermo Scientific Thermo Scientific Vanquish VC-D40, Operating Manual

Page: 158 / 174

10 • Accessories, Consumables and Replacement Parts
Page 158 Variable Wavelength Detectors (VC-D40, VF-D40)
Operating Manual
10.3 Optional Accessories
Flow cells and Flow cell accessories
Item Part No.
Standard flow cell, SST, 10 mm 6077.0250
Semi-micro flow cell, SST, 7 mm 6077.0360
Standard Bio flow cell, PEEK, 10 mm 6077.0200
Semi-micro Bio flow cell, PEEK, 7 mm 6077.0300
Nano flow cell, fused silica, 10 mm* 6074.0270
Capillary flow cell, fused silica, 10 mm* 6074.0280
Micro flow cell, fused silica, 10 mm* 6074.0290
Semi-preparative flow cell, PEEK, 0.4 mm 6074.0320
Diagnostic cell 6077.0190
Flushing and injection kit for flow cells, including syringe 6078.4200
Viper capillary, 0.13 x 450 mm, stainless steel
For connecting column and flow cell inlet when using
UltiMate 3000 flow cells
6040.2345
* There is no exact definition of the light path in capillary flow cells as is for conventional
flow cells. Therefore, you should not use this value for calculating the absorption
coefficient or the detector sensitivity according to the Lambert-Beer law.
TIP UltiMate 3000 variable wavelength detector flow cells have the
connection unit on the left side. To connect the column outlet to the
connection unit installed on the left side of the flow cell in a Vanquish
variable wavelength detector, Thermo Fisher Scientific recommends
using the capillary of 450 mm length listed in the table above.
Miscellaneous
Item Part No.
VIS lamp (tungsten lamp) 6074.2000
DAC board
Provides two analog outputs. Contact Thermo Fisher Scientific
Technical Support for installation.
6083.0900