Thermo Scientific Thermo Scientific Vanquish VC-D40, Operating Manual

Page: 126 / 174

7 • Maintenance and Service
Page 126 Variable Wavelength Detectors (VC-D40, VF-D40)
Operating Manual
7.11 Replacing the Doors
When
Damage of door
TIP The maintenance procedures do not require that you remove the
doors. If this should ever be required for a specific reason or procedure,
follow the related steps in this section.
Parts required
Replacement door
Follow these steps
NOTICE
To avoid damage to the door hinges, be careful when performing the
following sequence of steps and do not apply force.
1. To remove a door, push the door upward while opening.
Open the door to a position in which the two hinges on the housing
are aligned in the grooves on the door. You can remove the door
only when the hinges are in the grooves.
Figure 27: Unhinging a door
No. Description
1 Hinge on the housing
2 Reception groove on the door
2. Slightly tilt the door to the outside, away from the housing, and
remove the door.