4
Xcalibur Diagnostics for the PDA Detector
Creating a Display Method to View the Light Intensity
Thermo Scientific
Surveyor PDA Plus Detector Hardware Manual
45
Figure 45.
Information Page with the event log
Creating a Display Method to View the Light Intensity
To adjust the attenuators and monitor the status of the lamps, you create a display method,
and then view a spectrum of the light intensity in the
Surveyor PDA Plus Direct Control >
Spectrum
page.
Display methods have an SPDA
file extension. These methods cannot be used in the
Sequence Setup portion of the Xcalibur data system. Files with the SPDA extension can only
be loaded and used in the Direct Control dialog box. The auditing feature in the data system
does not track the creation and modification of display methods.
