Thermo Scientific STERI-CYCLE i160, User Manual

Page: 27 / 200

2
Installation of the device
Transport
Thermo Scientific
S
TERI-CYCLE
i160
/
i250
2-3
Transport
For transport, do not lift the device using the doors or components attached to the device (e.g. control
box on rear panel) as lift points.
Figure 2-2. Lift points
Stacking
S
TERI-CYCLE
i160
/
S
TERI-CYCLE
i250
is suited for stacking up to two devices of the same device type. This
is accomplished by placing an optional stacking adapter (1/ Figure 2-3 ) between the two units.
As an option, a mobile base rack (2/ Figure 2-3 ) is available in order for the units to be movable. The
rollers of the base rack are fitted with a locking brake.
Note
Lift points:
Lift the device only using the lift points.
CAUTION
Heavy loads! Lift with care!
To avoid injury through physical strain, such as strain traumata and slipped discs, do not attempt to
lift the incubator alone!
To avoid injury through dropped loads, be sure to wear Personal Protection Equipment, such as
safety shoes, when lifting the incubator.
To avoid crushing your fingers or hands (particularly in a closing door) or damaging the incubator, do
not use any other lift points than those indicated in the illustration above.
Note
when installing the stacking adapter and stacking the units, follow the assembly instructions
delivered with the stacking adapter.