Thermo Scientific SRD-3200, Operating Instructions Manual

Page: 19 / 64

UltiMate 3000 Series:
SRD-3x00 Solvent Racks
Operating Instructions Page 13
2.3 Front Panel Elements
2
1
Fig. 1: Front panel view
No. Element Description
1 Status LEDs
Power The LED is blue when the SRD power is on.
Vacuum The LED is green if the degasser is working properly.
The Vacuum and Status LEDs are red if the degasser vacuum is
insufficient for proper degassing.
Status The LED is green if the degasser is working properly and no leaks have
been detected.
The LED is red if the leak sensor reports a leak.
The Status and Vacuum LEDs are red if the degasser vacuum is
insufficient for proper degassing.
2 Standby button Switches the SRD to standby mode. The LED of the standby button is red
when the SRD is in standby mode.
To resume operation, press the standby button again (the LED is not
lighted).
Note : To allow the SRD to change the mode, press and hold the Standby
button for at least one second.
Important:
If you switch a pump to which a SRD-3x00 Solvent Rack is
connected to the Standby mode, the Solvent Rack, too, will be set to
Standby mode.
Important: Si vous commutez une pompe à laquelle est raccordé un dégazeur
SRD, en mode Veille, le dégazeur passera également en mode
Veille.