selected under "Connect
Using." Click "OK."
5. In the "COM1 Properties" box \ "Port Settings"
folder select the following
options:
·
Bits per second:
∂
19200
·
Data bits:
∂
8
·
Parity:
∂
None
·
Stop bits:
∂
1
·
Flow control
∂
None
After verifying the above settings, click "OK."
6.
In the main dialog box click on "File" \ "Save."
7. Exit the program by clicking on "File" \ "Exit" \
"Yes".
8. Verify the program was saved by going to "Start"
\ "Programs" \
"Accessories" \ "Communications" \
"HyperTerminal" \ "Max Q Shaker."
9. This completes the configuration of
HyperTerminal.
10. Turn shaker off and connect computer (COM 1)
to shaker (COM PORT) with
DB-9 serial printer cable.
11. Start HyperTerminal by clicking on "Max Q
Shaker."
12. Power up shaker. Shaker will screen print
speed, time and temperature at one-minute
intervals.
24
O
PERATION