Thermo Scientific SAM12, Manual

Page: 99 / 176

Issue: 1.0 Operating Instructions
Thermo Fisher Scientific SAM12 User Manual 5-59
with intervention by an
Administrator.
See
Doors (page 5-13) for more
information regarding Lock Front
Door on Alarm.
If the CCM board is installed and
the CCM option (see
Options
(page 5-6) ) is selected, when the
High Level CCM Alarm (see
Alarms (page 5-12) ) is exceeded,
the "High Co60 Alarm" message
will display.
Note that this message is user-
definable, see
Messages (page 5-
15) for further information.
If the Lock Front Door on Alarm
is set to High or All Alarms, the
door will be locked and can only
be opened with intervention by
an Administrator.
See
Doors (page 5-13) for more
information regarding Lock Front
Door on Alarm.
On a two-door SAM12, the front
door will be locked and back
door will be unlocked.
Also, a high alarm will sound for
5 seconds.
If the Lock Front Door On Alarm option is set to 'Never', the
door can be opened and the Articles removed (see
Remove
Articles (page 5-61) ).
See Doors (page 5-13) for more information regarding Lock
Front Door on Alarm.
Following an alarm, if the
Residual Contamination Check
after Alarm option is ticked (see
Options (page 5-6) ), the "Ready –
Preparing for Contamination
Check" message is displayed.
After the contaminated article is
removed and the Door is closed,
the Residual Contamination
Count is performed.
See
Notes regarding Residual
Residual Contamination
Check