Ramsey Oretronic IV Tramp Metal Detector REC 4479C
Page 59
Units
Base Address:
H865
Type:
UINT16
Access:
Get/Set
Length:
N/A
Persistent
Yes
Min:
0
Max:
1
This item holds the value of the GUI units selection. The encoding is shown below.
Value
Meaning
0
English
1
Metric
Normal Fine Sensitivity
Base Address:
H977
Type:
UINT16
Access:
Get/Set
Length:
N/A
Persistent:
Yes
Min
0
Units
Counts
Max
999
Default
250
This parameter gives the detection threshold indirectly. The detection threshold is 1000-
F
where
F
is the value
of this parameter. It has units of signal counts.
Marker Distance
Base Address:
H993
Type:
FLOAT32
Access:
Get/Set
Length:
N/A
Persistent:
Yes
Min
1.5
Units
Meters
Max
100
Default
1.5
This parameter specifies the distance in meters from the detector coils to the marker/diverter. If a piece of
tramp is detected at belt position
X
, the marker/diverter will be activated at belt position
X
+
M
where
M
is the
value of this parameter.
Marker Duration
Base Address:
H1009
Type:
FLOAT32
Access:
Get/Set
Length:
N/A
Persistent:
Yes
Min
0.1
Units
Seconds
Max
1.0
Default
0.1
This parameter specifies length in seconds of the marker/diverter activation pulse.
