Ramsey Oretronic IV Tramp Metal Detector REC 4479C
Page 37
Options Screen
System options are selected from the Options screen using the soft keys; the up-arrow and down-arrow keys
shift focus to the desired option; the currently selected option is displayed as white text on a black
background.
The “Back” key returns the TMD IV
to the Run screen. Figure 3-4a shows the option screen in
navigation mode, with the “Sync Input” option selected.
Figure 3
–
4a. Options Screen, upper section, navigation mode.
Figure 3
–
4b. Options Screen, lower section, in selection mode
To change the currently selected option, press the “Select” soft
-key; this will change the display of the option
value (rightmost column) to white text on a black background, while also changing the “Select” and “Back” soft
keys to “Accept” and “Cancel”. To change the options value, use the up and down arrow keys to scroll through
the available selections. When the desired value is displayed, press the “Accept” key, and the screen will
return to navigation mode. If the Select key was p
ressed in error, press the “Cancel” key to return to
navigation mode with the original value, regardless of the current selection.
The following sections explain the use of each of the options.
