Ramsey Oretronic IV Tramp Metal Detector REC 4479C
Page 18
Technical Specifications
This section lists the technical specifications for the TMD IV. Specifications apply to both dual coil and under
belt single coil models unless otherwise noted.
Requirements
Metrics
Units
Specification
Operating Temperature
Temperature range
Degrees
-50°C to +58°C (-58°F to +136°F)
Note:
heater req’d below
-40°C
Storage Temperature
Temperature range
Degrees
-30°C to +70°C
(-22°F to +158°F)
Enclosure rating
IP/NEMA
NEMA 4X IP66
–
Fiberglass encl
(P/N 147797)
NEMA 4 IP66 - Painted Steel encl
(P/N 147800)
Humidity
%
10 to 95%, non-condensing
Altitude
Max altitude
m
2000 (6,561ft)
Pollution Degree
Level 2 per IEC 61010-1
Installation Category
II
Inspection speed
Range of material speed m/sec (FPM)
0.03-9.14m/sec (5-1800 FPM)
Input Voltage
V
98-253 VAC for 4ST and 6ST models
115 VAC for 4LT-115 and 6LT-115 models
230 VAC for 4LT-230 and 6LT-230 models
Input power frequency
Hz
48-62
Pulse Power
A
4 A for Oretronic IV-4 models
6 A for Oretronic IV-6 models
Table 1-1. Technical Specifications
