Chapter 3
|
Meter Setup Menus
Temperature Menu
Orion Star A220 series portable meters offer a Temperature menu used to customize
temperature settings for each channel by manually entering a temperature value, selecting the
temperature units as °C or °F and performing a temperature calibration on an ATC probe,
conductivity sensor or dissolved oxygen sensor with built-in temperature.
Meter Model
Channel
Temperature Menu
Menu Options
Star A221 pH Meter
pH Channel
•
Manual Temp Value
Enter temperature value
•
Temperature Unit
•
Celsius
•
Fahrenheit
•
Temperature Calibration
•
ATC
Star A222
Conductivity Meter
COND
Channel
•
Manual Temp Value
Enter temperature value
•
Temperature Unit
•
Celsius
•
Fahrenheit
•
Temperature Calibration
•
ATC
Star A223
RDO/DO Meter
DO/RDO
Channel
•
Temperature Unit
•
Celsius
•
Fahrenheit
•
Temperature Calibration
(polarographic DO sensor only)
•
Solution Temperature
•
Membrane Temperature
•
Sol & Mem Temp
Manual Temperature Value
1.
In the measurement mode, press the setup key.
2.
Press the
p
,
q
,
t
or
u
key to highlight pH Channel or COND Channel and press the
f3 (select) key.
3.
Press the
p
or
q
key to highlight Temperature and press the f3 (select) key.
4.
Press the
p
or
q
key to highlight Manual Temp Value and press the f3 (select) key.
5.
Press the f3 (edit) key access the popup number entry screen and enter the sample
temperature value.
a.
Press the
p
,
q
,
t
or
u
key to highlight a number, decimal point
or negative sign and then press the f3 (enter) key to select the
highlighted item. Repeat until the sample temperature value is
shown at the top of the screen.
b.
Press the f2 (done) key to save the value and exit the number
entry screen.
6.
Press the f1 (back) key to return to the main temperature menu and press the measure
(esc) key to return to the measurement mode.
0
1
2
.
3
4
5
6
7
8
9
–
backspace
back done enter
Thermo Scientific
Orion Star A220 Series Portable Meter User Manual
|
29
Summary of Contents for Orion Star A220 Series
Page 5: ......
