Thermo Scientific Orbitrap Fusion, Getting Started Manual, Page: 9 / 42

Thermo Scientific Orbitrap Tribrid Series Getting Connected Guide ix
P
Preface
The Orbitrap Tribrid Series Getting Connected Guide is intended for the following Thermo
Scientific™ mass spectrometers (MSs):
• Orbitrap Fusion™ (also known as Fusion™)
• Orbitrap Fusion Lumos™ (also known as Lumos™)
• Orbitrap ID-X™(also known as ID-X™)
This guide describes how to install the MS system in your laboratory and connect any external
liquid chromatography (LC) devices. External devices include those that are controlled from
or are independent of Thermo Scientific mass spectrometry applications, such as the Thermo
Xcalibur™ data system. For a list of hardware differences for this MS series, see
Model
Differences .
Also, because this guide uses drawings of various connections and component parts to help
illustrate procedures, be sure to start from
, no matter where it appears.
Contents
• Accessing Documentation
• Providing Documentation Feedback
• Special Notices, Symbols, and Cautions
• Model Differences
• Contacting Us
IMPORTANT Thermo Fisher Scientific field service engineers access internal components
by opening the top cover. Ensure that the instrument location allows for a vertical
clearance of at least 92 cm (36 in.) above the instrument. For additional clearance
guidelines, refer to the Preinstallation Requirements Guide.