1
Connecting the Forepump for the Vacuum System
Locking the Workbench Wheels
4
Orbitrap Tribrid Series Getting Connected Guide
Thermo Scientific
Locking the Workbench Wheels
After you position the forepumps and workbench, lock the workbench wheels.
To lock the workbench wheels
1. Lift up the workbench’s front panel to remove it, and set it aside.
2. Lock the front wheels by moving the locking levers forward to the upright position.
The locking levers have three positions. To fully unlock the roll and swivel movements,
push the levers back to the third position (almost horizontal).
3. Reattach the front panel when you are ready.
CAUTION Possible pinch points.
Be aware where you place your hands when you
remove or attach the workbench’s front panel.