28 | PC Software-Odastat NX
OdaLog Portable Gas Loggers
Instrument Parameters
Figure 35. Instrument Parameters-Main Tab
From the Odalog main menu click the
“In
strument
Paramete
rs”
tab to set the below parameters.
Site ID
- This User ID is to identify the instrument and where
its deployed.
Logging Setup
•
WakeUp Time Interval
- Time interval in minutes
and seconds between the collection of each data
sample by the Odalog.
•
Check the boxes for the parameters you want to log.
Instrument Setup
•
Calibration Gas Value
- Enter the gas value in this
box.
•
Alarm Settings
- These controls allow the user of
the instrument to set low average and high gas
concentration threshold values. When these values
are exceeded, the instrument will notify the user via
email and/or sms to a cellular phone.
Bluetooth Settings
•
Bluetooth Name
- Enter the name in this box. The
Bluetooth name is limited to 5 Alpha numeric
characters.
•
Bluetooth Wakeup Interval
- Set the time interval
for the Bluetooth to wakeup.
Temperature Setup
- Select the temperature to be logged in
either Celsius or Fahrenheit.
G20 RTX Communication Setup
- The
“Ins
trument
Parameters
”
that can be accessed are dependent on the type
of G20 RTX communication setting.
The communication with the device can be done with either
Modbus or 4G Modem.
