4
Learning Center
Basic Instrument Operations
90
NanoDrop One
C
with NanoDropQC Software User Guide
Thermo Scientific
NanoDrop One General Operations
These operations are available from any measurement screen or from the
Data Viewer
.
Manage Identifiers (on the instrument)
You can add one or more “identifiers” (i.e., labels or metadata tags) to an experiment to make
the experiment easier to find. Labels can be added from the NanoDrop One software running
on the instrument, or from the NanoDrop QC software installed on a personal computer (see
Manage Identifiers on a PC
).
Use the Data Viewer to add labels to experiments, assign existing labels, view assigned labels
and remove or delete labels on the instrument. You can filter the list of experiments in the
Data Viewer based on one or more user-defined labels.
Label new experiment when you save it
–
after the last sample has been measured, tap
–
in End Experiment box, tap
Add Identifier
field
–
use displayed keyboard to enter label and tap
–
tap
Done
key
–
tap
End Experiment
Label experiment in Data Viewer
–
from Home screen, tap
to open Data Viewer
–
tap to open an experiment
