4
Learning Center
Basic Instrument Operations
78
NanoDrop One
C
with NanoDropQC Software User Guide
Thermo Scientific
Auto-Measure and Auto-Blank Options
Speed up sample analysis with the NanoDrop One Auto-Measure and Auto-Blank features,
which cause the instrument to start the measurement immediately after you lower the
instrument arm. These options eliminate the need for repetitive Measure or Blank operations
for large batches of samples.
Auto-Measure
To select or deselect Auto-Measure, from any sample measurement screen, tap the
On
or
Off
button at the right of the Measure button.
Auto-Blank
To select or deselect Auto-Blank, from any blank measurement screen, tap the
On
or
Off
button at the right of the Blank button.
End Experiment Button
Tap
End Experiment
when you are ready to name and save your experiment, add a label to
help you locate the experiment later or export the data.
Note
Auto-Measure and Auto-Blank are available for micro-volume measurements only.
