manualshive.com logo in svg

Thermo Scientific NanoDrop One, User Manual, Page: 205 / 328

Share
Download
Thermo Scientific NanoDrop One User Manual Download Page 205

 

18 

Learning Center

Prepare Samples and Blanks

Thermo Scientific

NanoDrop One User Guide

199

Prepare Samples and Blanks

Preparing Samples

Choosing and Measuring a Blank

The buffer used to resuspend a sample analyte can contribute absorbance. Blanking minimizes 
any absorbance contribution due to the buffer components from the sample measurement. 
The resulting sample spectrum represents the absorbance of only the analyte of interest. For 
more information, watch the multimedia training 

What is a blank?

• Isolate and purify samples before measuring 

them with the instrument. Commercial 
sample isolation kits are available for these 
purposes, or use an in-house protocol. After 
purification, analyte of interest is typically 
dissolved in aqueous buffer solution before 
it is measured. 

Tip

: Any molecule that absorbs light at 

analysis wavelength will contribute to total 
absorbance value used to calculate sample 
concentration.

• Ensure final analyte concentration is within 

instrument’s 

absorbance detection limits

.

• For micro-volume measurements, gently 

(but thoroughly) vortex each sample before 
taking a measurement.

Tip

: Heat highly concentrated or large 

molecule nucleic acid samples, such as 
genomic or lambda DNA, to 63 °C 
(145 °F) before vortexing them.

• Avoid introducing bubbles when mixing 

and pipetting. For more information, 
watch multimedia training 

Effects of 

Bubbles in Samples

.

Note  

Samples dissolved in extremely volatile solvent such as hexane may work best with 

cuvette sampling option

 (NanoDrop One

C

 instruments only).

Summary of Contents for NanoDrop One









































































































































































































































































































































Reviews:

No comments