Thermo Scientific Micro-Tech 9101, Reference Manual

Page: 69 / 329

Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-29
This menu allows you to enter the maximum scale capacity of the
particular scale you are using in your facility. Please note that the
maximum scale capacity is expressed as a
rate —for example, tons per
hour (Tph), tonnes per hour (t/h), and so on. In other words, do not enter
the maximum weight the scale can be loaded with, because the Micro-
Tech is looking for a rate.
The Micro-Tech display should look something like this, depending on
the choices you made in the menus above.
1. To enter the maximum capacity of your particular scale, press the
Edit button and use the keypad to enter the appropriate value, using
the decimal point, if needed. In addition, please note the following.

If you need to enter a value such as 1234.5 tons per hour, soft
key 3 allows you to enter the decimal point. (See screen shot
below.)

There cannot be more than three numerals after the decimal.
(Thus, 12.345 is allowed but not 12.3456, which will be
truncated to three decimal places.)

Whatever value you enter cannot contain more than seven
characters, including the decimal point.

The maximum rate (that is, the scale capacity) cannot exceed
200,000 units of measure.
Entering the
Maximum Scale
Capacity
BATCH
- SC DATA SCROLL 2 -
Max. scale capacity
500.00 Tph
READY ALARM CALIB
EDIT