Thermo Scientific KingFisher Flex, Service Manual

Page: 168 / 228

7-14 Software Version 1.1
Service Manual Thermo Fisher Scientific KingFisher
®
Flex
ui_decvalue
Value read in decimal notation.
a_hexvalue
Value read in hexadecimal notation.
The address must be in range 0..FFFFFF. A word read from an odd address is illegal.
Recordable: No
Example:
REA W FF1E
:
REA
REA 65535 FFFF
REA END 0
The above command reads a word from hex address FF1E. The ONES register of the micro
controller is at that address and thus the shown response is always returned.
7.1.11.14 REC-start or stop sequence recording
This command starts or stops recording of a command sequence to nonvolatile memory. As
many sequences can be stored as the available memory permits, or 512 if this limit comes first.
These sequences can be run manually by first selecting the sequence with the arrow keys and
then pressing Start key. Maximum size of a protocol is 65000 bytes.
Format 1:
Command:
REC uc_switch a_sequence a_name
uc_switch
1 = start recording
a_sequence
Name of the sequence. max. 17 characters.
a_name
Sequence name already in memory. The new sequence is linked to
this sequence.
This format can be used for a new purification application having identical processing steps as the
sequence already in the memory. The new sequence actually is a link to the existing sequence
and has no steps itself. The argument
a_name
may also be the name of a sequence which is
linked to another sequence, but in this case the link is set directly to the sequence actually run.
For this command format no stop recording command is needed.
Format 2:
Command:
REC uc_switch a_sequence
uc_switch
1 = start recording
a_sequence
Name of the sequence. max. 17 characters.