5.
Install the fuse holder.
6.
Plug in, then power on the iBright
™
imager. The installation is successful if the
instrument powers on.
Note:
Fuse failure can result from fluctuations in the supplied power to the iBright
™
imager. To prevent further failures, consider installing an electrical protective device,
such as a UPS or surge protector.
Move the instrument
CAUTION!
PHYSICAL INJURY HAZARD
. Do not attempt to lift the instrument
or any other heavy objects unless you have received related training. Incorrect
lifting can cause painful and sometimes permanent back injury. Use proper lifting
techniques when lifting or moving the instrument. At least two people are required to
lift it.
IMPORTANT!
Moving your instrument can create subtle changes in the alignment
of the instrument optics. Recalibrate the instrument if necessary.
• Ensure that the surface on which you place the instrument can support at least
50 kg (110 lbs).
• Ensure that the path to transport the instrument is clear of obstructions.
• At least two people are needed to lift and carry the instrument.
• Keep your spine in a good neutral position.
• Bend at the knees and lift with your legs.
• Do not lift an object and twist your torso at the same time.
• Coordinate your intentions with your assistant before lifting and carrying.
Maintain the instrument
Move the instrument
32
iBright
™
CL750 Imaging System User Guide
