Thermo Scientific HM525 NX Operator Guide
67
Note
Clean and disinfect these accessories according to the lab regulations and transport them in a dry condition.
•
Clean and disinfect the cryo chamber according to the lab regulations.
•
Unscrew the handwheel handle for transportation.
Note
To make sure that there is no condensation water inside the chamber; let the instrument dry for approx. 48.
•
Clean and disinfect the cryo chamber according to the lab regulations Loosen the fastening screws of the
rollers
•
Arrange the dismounted accessories into the intended transportation packaging
Note
Before the further transportation, tighten the fastening screws so that the instrument does not move during
transportation.
•
Slightly tilt the HM525 NX and insert the foam parts underneath it.
•
Place the case over the instrument.
•
Insert the wooden cover.
•
Attach the tightening strips around the packing.
Disposal of the Instrument after Final Shutdown
After the final shutdown of the instrument, we recommend to contact a local recycling company for
disposal according to the national applicable regulations.
To be applied in countries of the European Union and other European countries with a
separate collecting system within the waste management.
The marking of the product and/or the respective literature indicates that, after its final shutdown, it must
not be disposed of together with ordinary domestic waste.
•
Please dispose of your instrument separately from other waste to prevent damage to the environment
and/or human health by uncontrolled waste disposal.
•
Recycle your instrument to support the sustainable recycling of material resources.
•
Industrial users should contact their suppliers and observe the conditions of the contract. This product
must not be disposed of together with other commercial waste.
•
Please contact your supplier.
