Thermo Scientific Heracell Vios 160i CR, Operating Instructions Manual

Page: 91 / 216

6
Handling and Control
Operating Panel and Operating Structure
Thermo Scientific
Heracell Vios 160i / 250i CR
6-5
Version with combined CO
2
/O
2
/N
2
Control (Optional)
Figure 6-4. iCan Touchscreen with Combined Gas Connection
Function keys and actual value readouts on the operating panel for versions with a combined
CO
2
/O
2
/N
2
gas supply source:
1. Workspace temperature display field with actual value (large numeric readout at center), set value
(small numeric readout top right) and unit (bottom right)
2. CO
2
concentration display field with actual value (large numeric readout at center), set value
(small numeric readout top right) and unit (bottom right)
3. HEPA filter activity display (icons for further options see “Icon Description” on page 6-39 )
4. Key for starting the Steri-Run sterilization routine
5. Key for opening the menu navigation
6. Key for starting the auto-start routine
7. O
2
concentration display field with actual value (large numeric readout at center), set value (small
numeric readout top right) and physical unit (bottom right)
8. Display field water level RH
Structure of the Operating Levels
Operation is divided into three levels:
• A: Direct access to the control loop settings: Temperature, CO
2
, O
2
setpoint,
• B: Starting the Steri-Run or auto-start routine of the unit,
• C: Navigation through the submenus for device configuration.