Thermo Scientific Heracell Vios 160i CR, Operating Instructions Manual

Page: 66 / 216

4
Start-up
Installing the HEPA Filter and the Water Reservoir Cover Panel
4-6
Heracell Vios 160i / 250i CR
Thermo Scientific
Figure 4-4 shows lists the parts that make up the air duct assembly installed in the inner chamber.
l
Figure 4-4. Air Duct Parts Heracell Vios 160i CR
Note
Do not remove the air duct seals on the Heracell Vios 160i CR versions. The rear wall air ducts
are important for proper air flow on VIOS160 models with a stainless steel inner chamber.
Installing the HEPA Filter and the Water Reservoir Cover
Panel
The HEPA filter (2/ Figure 4-5 ) must be inserted into the airbox (1/ Figure 4-5 ) from below. The airbox
rests on the water reservoir cover panel (2/ Figure 4-6 ) and is pushed against the air intake.
2
1
3
4
1 – air duct rear wall

(spare part includes 3 and 4)

2 – air duct ceiling

3 – blower scroll

4 – sealing parts