Thermo Scientific Heracell Vios 160i CR, Operating Instructions Manual

Page: 55 / 216

3
Description of the Device
Workspace Components
Thermo Scientific
Heracell Vios 160i / 250i CR
3-19
Figure 3-11. Water Reservoir
The water reservoir is monitored by the water level sensor described in section “Sensor System” on
page 3-10 .
A fill level indicator with the punched-out word “MAX“ (1/ Figure 3-11 ) is suspended above the water
reservoir to indicate the maximum fill level. The maximum fill volume of the water reservoir is 3 liters.
In order to minimize interference to the workspace atmosphere during water replacement without
disruption of incubation operation, the unit has a front-side quick-drain valve. Plugging the drain tube
supplied into the front-side quick-drain valve starts draining immediately.
Figure 3-12. Fill and Drain Valve of Water Reservoir