Thermo Scientific Heracell Vios 160i CR, Operating Instructions Manual

Page: 29 / 216

2
Installation of the Device
Stacking
Thermo Scientific
Heracell Vios 160i / 250i CR
2-5
Figure 2-4. Stacking Adapter and Base Rack with Stacking Elements
Figure 2-5. Fastening the Adapter Plate to the Lower Unit
Figure 2-6. Removing the Screws
1. Remove the 2 outer rear panel screws on both sides of the lower unit and store them.
2. Place the lower device on the mobile base rack on the attachment points so that the rear side rests
against the connecting straps.
3. Using the outer rear panel screws on the left and right side, attach the device to the connecting
straps, only tightening the screws to hand-tight.