Thermo Scientific Heracell Vios 160i CR, Operating Instructions Manual

Page: 27 / 216

2
Installation of the Device
Transport
Thermo Scientific
Heracell Vios 160i / 250i CR
2-3
Transport
For transport, do not lift the device using the doors or components attached to the device (e.g. control
box on rear panel) as lift points.
Figure 2-2. Lift Points
Note Lift points:
Lift the device only using the lift points.
CAUTION
Heavy loads! Lift with care!

The weights without accessories are for
Heracell Vios 160i CR
- 95 kg and for
Heracell Vios 250i CR
-
119 kg.

To avoid injury through physical strain, such as strain trauma and slipped discs, do not attempt to
lift the incubator alone! Use the required number of persons or lifting aids according to the weight.

To avoid injury through dropped loads, be sure to wear personal protection equipment such as
safety shoes, when lifting the incubator.

To avoid crushing your fingers or hands (particularly in a closing door) or damaging the incubator, do
not use any other lift points than those indicated in the illustration above.