4
GENESYS 30 User Guide
Thermo Scientific
About the Keypad
Important features of your software:
Press Autozero to record a blank value in Live Display, Fixed, OD600, Analyzer
and Quant modes. Record a baseline in Scan mode.
Press the Home key to return to the home page at any time. If going to the
home menu will cause you to lose result data, the software will warn you and
give you the opportunity to cancel the action before going to Home.
When the number in a field is highlighted you can simply start keying in
numbers and it will be over-written.
If there is a line cursor between or next to the value, you need to use
to
erase digits one by one. Also, if you erase a value completely and then press
, the value that was in the cell before you erased it will be restored.
• In any text or number entry fields
causes one character or number to
be erased per press.
• In alerts or dialogs where the user is not entering numeric or text data and
there is a
Cancel
button displayed on the screen, pressing
on the
keypad has the same effect as navigating to
Cancel
and pressing
.
Number pad: enter numeric
values
Nav keys: controls navigation
on the instrument screen
Autozero: measure a
blank value or
baseline scan
Home: go to the home screen
Stop: stop the
current operation
Start: start the measurement specified using
the current settings
Backspace: remove
displayed values for
new data entry
Print: print the method or results
to the on-board printer with a date
and time stamp
Enter: accept user-entered values
