8
Chapter 2 | Getting Started
2.2 Universal Power
Supply Assembly
A universal power adapter (Catalog Number EB1700PWR)
with US/Japan, Euro, UK/Singapore, Australia/New
Zealand and China wall plug plates is included with the
meter. This universal power adapter is specifically for use
with this meter. Use of other power adapters can damage
the meter and will void the warranty.
Note: The power adapter plug has two prongs that allow
the power adapter to be locked onto the meter. These two
prongs must be properly aligned when connecting it to
ensure it is fully connected and locked onto the meter.
Unpack the power supply provided with the meter.
Select the appropriate wall plug plate for the power
outlet that will be used.
Slide the appropriate wall plug plate into the groove
on the back of the power adapter.
Connect the assembled power adapter to the meter
input.
a.
Locate the two slots on the meter power input.
b.
Align the two tabs on the power adapter
connector with the two slots on the meter
power input.
c.
Insert the power adapter connector into the
meter power input and twist clockwise to lock
the connection.
Connect the assembled power adapter to a power
outlet.
You are now ready to turn on the meter.
CAUTION: Use of a surge protector or
uninterrupted power supply (UPS) is
recommended, as an unintended power
surge of electricity to the meter may
damage the meter and void the warranty.
Summary of Contents for Eutech EC 1720
Page 2: ......
