Eutech EC 1720 Conductivity Meter 21
3.2.13 Set Date Format
Set the date format as month-day-year (MM.DD.YYYY) or
day-month-year (DD.MM.YYYY).
Press the
or
key to scroll through the Setup
Menu list until the Set Date Format item is shown.
Press the
or
key to set the date format.
Press the “Enter” key to save the change.
3.2.14 Set Date Value
Set the month, day and year values. The date format used
for this Setup Menu item will match the setting in the Set
Date Format item. For this example, the month-day-year
(MM.DD.YYYY) format is shown.
Press the
or
key to scroll through the Setup
Menu list until the Set Date Value item is shown.
The month value will flash. Press the
or
key to
adjust the month.
a.
Press the
key to increase by one month.
Press and hold the
key to quickly increase.
b.
Press the
key to decrease by one month.
Press and hold the
key to quickly decrease.
Press the “Enter” key to save the change.
The day value will flash. Press the
or
key to
adjust the day.
a.
Press the
key to increase by one day. Press
and hold the
key to quickly increase.
b.
Press the
key to decrease by one day.
Press and hold the
key to quickly decrease.
Press the “Enter” key to save the change.
The year value will flash. Press the
or
key to
adjust the year.
a.
Press the
key to increase by one year. Press
and hold the
key to quickly increase.
b.
Press the
key to decrease by one year.
Summary of Contents for Eutech EC 1720
Page 2: ......
