20
Chapter 3 | Setup Menu
3.2.11 Timed Interval
When Timed is set as the Read Type, set the time interval
from 5 seconds to 60 minutes. This time interval is used to
automatically save and export measurements.
Press the
or
key to scroll through the Setup
Menu list until the Timed Interval item is shown.
Press the
or
key to adjust the time value.
a.
Press the
key to increase the time value by
one second. Press and hold the
key to
quickly increase.
b.
Press the
key to decrease the time value by
one second. Press and hold the
key to
quickly decrease.
Press the “Enter” key to save the change.
3.2.12 Calibration Due Alarm
Set the calibration due alarm interval from 0 hours (off) to
168 hours. An alarm is triggered if a calibration is not
performed within the specified time interval.
Press the
or
key to scroll through the Setup
Menu list until the Calibration Due Alarm item is
shown.
Press the
or
key to adjust the alarm value.
a.
Press the
key to increase the alarm value by
one hour. Press and hold the
key to quickly
increase.
b.
Press the
key to decrease the alarm value
by one hour. Press and hold the
key to
quickly decrease.
Press the “Enter” key to save the change.
Summary of Contents for Eutech EC 1720
Page 2: ......
