6
Chapter 1 | Introduction
Chapter 1
Introduction
Thank you for purchasing the Thermo Scientific
™
Eutech
™
DO 1730 dissolved oxygen bench meter. The Eutech 1700
series meters are designed to provide the important
functions needed for routine measurements with simplified,
convenient, easy-to-use functionality.
The Eutech DO 1730 dissolved oxygen meters are capable
of measuring dissolved oxygen as % saturation or
concentration in mg/L or ppm simultaneously with
temperature. These meters offer a large, backlit display for
clear viewing with small footprint to conserve laboratory
bench space.
Ensure important data is preserved with a 500-point data
log with date/time stamp that can also be exported to a
printer or computer using the meter communication port.
All Eutech DO 1730 dissolved oxygen meters include a
meter-attached electrode holder and universal 100-240V
power adapter with wall plugs for US/Japan, Euro,
UK/Singapore, Australia/New Zealand and China.
Additional meter accessories can be viewed at
www.thermofisher.com/electrochemistry
1.1 Intended Use
1.1.1 Intended Use
This device is a bench laboratory meter intended for use in
a typical, indoor, controlled, laboratory environment. This
device should only be used for analytical testing in
accordance with these instructions.
1.1.2 Non-Intended Use
This device is not a Medical Device. It is not intended to be
used to diagnose, treat, cure, or prevent disease.
1.1.3 Safety
CAUTION: This symbol, in the context of
a CAUTION, indicates a potentially
hazardous situation which if not avoided
could result in minor to moderate injury or
damage to the equipment.
Note: This symbol, in the context of a
Note, indicates to follow the manufacturer
specified instructions, notes and
requirements set out in the instruction
manuals.
CAUTION: Before using or maintaining
this product, please be sure to read the
manual carefully. Failure to follow these
instructions may cause the product to
malfunction.
CAUTION: Use this product only in the
way described in the product literature
and in this manual. Before using it, verify
that this product is suitable for its
intended use. If the product is used in a
manner not specified by the manufacturer,
the protection provided by the product
may be impaired.
CAUTION: Do not modify system
components. Use OEM exact
replacement equipment or parts. Before
use, confirm that the product has not
been altered in any way.
Note: Unauthorized repair of your meter
will invalidate the warranty. For additional
information, contact Technical Support at
or (65) 6778 6876.
1.1.4 Power Connection
See the
Universal Power Supply Assembly
complete instructions on assembling and installing the
included meter power supply.
Note: Position the meter so the operator
can access the power connection and
unplug the power adapter in the event of
a fault so the hazard of electrocution can
be removed.
1.2 Cleaning Instructions
(Meter Only)
Wipe the exterior surfaces (except the display panel) using
a lint free cloth dampened in clean water.
Wipe the display panel with a clean microfiber cloth, taking
care to wipe lightly to avoid scratching the meter display.
The meter keypad can also be cleaned using a clean
microfiber cloth dampened with IPA (isopropyl alcohol) for
disinfection purposes.
Summary of Contents for Eutech DO 1730
Page 2: ......
