24
Chapter 3 | Setup Menu
3.2.18 Clear Data
Erase all data logs or erase all calibration logs
Press the
or
key to scroll through the Setup
Menu list until the Clear Data item is shown.
Press the
or
key to select the data log (dAtA)
or calibration log (CAL) to be cleared.
Press the “Enter” key to confirm the selection.
Press the “Enter” key again to ensure the selected
log is not accidentally erased.
The meter will confirm when the selected log is fully
erased.
The meter will return to the measurement screen.
3.2.19 Factory Reset
Erase all data logs, calibration logs and settings and return
the meter to its factory default state.
Press the
or
key to scroll through the Setup
Menu list until the Factory Reset item is shown.
Press the “Enter” key to confirm the selection.
Press the “Enter” key again to ensure all meter data
is not accidentally erased.
The meter will confirm when the factory reset is fully
complete.
The meter will restart and then return to the
measurement screen.
Summary of Contents for Eutech DO 1730
Page 2: ......
