Thermo Scientific Dionex UltiMate 3000 Series, Operating Instructions Manual

Page: 251 / 270

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Operating Instructions Page 243
11.3 Consumables and Spare Parts
The part number always refers to the packing unit. Unless otherwise stated, the packing
unit is 1 unit. For more information, contact the Thermo Fisher Scientific sales
organization for Dionex HPLC Products.
Description Part No.
Bottle cap (4 screw caps) for seal wash and solvent reservoirs 6270.0013
Cap plugs (to close open holes in the reservoir caps), 20 plugs 6000.0047
Cap plugs and retaining guides for reservoir caps, kit including
10 cap plugs (to close open holes in the reservoir caps) and
5 retaining guides (to keep the liquid line in place in the reservoir cap)
6030.9101
Capillaries, capillary kit (with fittings), including
2 capillaries from working cylinder to equilibration cylinder (U tubes)
2 capillaries from pump head to purge unit
2 capillaries from purge unit to inline-filter
6042.3001
Capillaries, capillary kit for loading pump (with fittings), including:
1 capillary from working cylinder to equilibration cylinder (U-tubes)
1 capillary from pump head to purge unit
1 capillary from purge unit to inline-filter
6041.3001
Capillaries, capillary kit for NC pump (nanoViper, MP35N), including:
2 capillaries from working cylinder to equilibration cylinder (U-tubes)
1 capillary from right pump head to flow meter inlet
1 capillary from left pump head to flow meter inlet
6041.3002
Capillary clips (column compartment) → Column installation/capillary clips kit
Capillary, nanoViper, MP35N (0.25 x 155 mm I.D. x L)
To be used, for example, for calibrating solvents with the ProFlow flow meter or
establishing the solvent viscosity with the Classic flow meter or for purging the flow
meter.
6041.7892
Check valve cartridge, sapphire (the cartridge is the same for both the inlet and
outlet valve)
for the NC pump and loading pump
6041.2300
Check valve cartridge, ceramics (the cartridge is the same for both the inlet and
outlet valve)
for the NC pump and loading pump
6041.2301
Check valve nut kit (Ti) for double check valve, including
inlet check valve nut and outlet check valve nut
(NC pump and loading pump)
6042.7007
Cleaning swabs (10 swabs)
(for example, to clean the connection ports on the pump block or purge unit)
6040.0006
Column ID (pack of 5 IDs) 6710.1505
Column installation clips → Column installation/capillary clips kit
Column installation, column clips → Column clips
Column installation/capillary clips kit, including 6041.0011