Thermo Scientific Dionex UltiMate 3000 Series, Operating Instructions Manual

Page: 149 / 270

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Operating Instructions Page 141
• Ship the NCS-3500RS always
without
valves. To protect the valve drives, reinstall the
foam inserts that were installed upon shipment of the NCS.
• Ship the module only in the original shipping container and observe the packing
instructions.
If the original shipping container is not available, appropriate shipping containers and
packing material can be ordered from Thermo Fisher Scientific sales organization for
Dionex HPLC products. The packing instructions are included in the "Installation and
Qualification Documents for Chromatography Instruments" binder and are available on
request.
Shipping the module in any other packaging automatically voids the warranty.
If you are running Chromeleon, you can set the module and HPLC system into the standby
mode or automate system shutdown.
Standby Program
A standby program sets the HPLC system into standby mode. The main program steps are:
• At the end of the program, the program automatically reduces the flow.
• The program reduces temperature of all temperature-controlled modules in the system.
From the standby mode, you can reactivate the application very quickly.
Shutdown Program
A shutdown program automates shutdown of the HPLC system. The main program steps are:
• At the end of the program, the program automatically reduces the flow.
• The program turns off certain system components and functions (for example, detector
lamps, temperature control).
To create a standby or shutdown program
Select one of the following alternatives:
• Select and perform the operating commands and parameters from the Commands dialog
box ( → page 89).
•
Create and run a corresponding program to automate the process (
→
page 92).