Thermo Scientific Dionex ICS-2000, Operator'S Manual

Page: 73 / 390

3 • Operation and Maintenance
Doc. 031857-03 4/06
3-9
3.4.4 Connect the Reservoir
If it is not already connected,
connect the
ELUENT BOTTLE
OUT
line from the reservoir
cap to the
ELUENT IN
line,
which extends from the
plumbing and cable chase on
the top of the ICS-2000 (see
Figure 3-10 ).
Figure 3-10. Reservoir Connections
3.5 Check All Connections
1. Make sure the eluent reservoir is filled and the tubing connecting the reservoir
to the ICS-2000 tubing is securely connected (see Figure 3-10 ).
2. Make sure the blue eluent generator electrical cable is connected to the
EGC-1
(or
EGC-2
) connector.
3. If a CR-TC is installed, make sure the black CR-TC electrical cable is
connected to the
CR-TC
connector.
4. If an EPM is installed, make sure the EPM electrical cable is connected to the
EGC-2
(or
EGC-1
) connector.
5. Make sure the USB cable from the computer is connected to the USB
receptacle on the ICS-2000 rear panel.
ELUENT
BOTTLE
OUT
ELUENT
IN