Dionex AutoTrace 280 Operator’s Manual
4
Doc. 065330-05 03/2020
1.3
Safety Information
The Dionex AutoTrace 280 is manufactured by Thermo Finnigan LLC at the
following location: 355 River Oaks Parkway, San Jose, CA 95134-1991 U.S.A.
The Dionex AutoTrace 280 is designed to perform solid-phase extraction water
methods. Operation of a Dionex AutoTrace 280 in a manner not specified by
Thermo Fisher Scientific may result in personal injury.
If there is a question regarding appropriate usage, contact Technical Support for
Dionex products before proceeding:
•
In the U.S. and Canada, call 1-800-532-4752, and select
option 2
.
•
Outside the U.S. and Canada, call the nearest Thermo Fisher Scientific office.
1.3.1
Safety Messages and Notes
This manual contains warnings and precautionary statements that can
prevent personal injury and/or damage to the Dionex AutoTrace 280
when properly followed. Safety messages appear in bold type and are
accompanied by icons, as shown below.
Appendix D
Glossary
Defines terms used in the Dionex AutoTrace 280
operator’s manual.
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury. Also used to identify a situation or
practice that may seriously damage the instrument, but will not cause
injury.
Indicates that the function or process of the instrument may be
impaired. Operation does not constitute a hazard.
