Thermo Scientific DensityPRO+, Installation Manual

Page: 55 / 107

Appendix C
Drawings
Note Information presented in this chapter has been regenerated from
original drawings. Every effort is made to maintain document accuracy.
However, in order to enhance legibility, the documents may have been
restructured, and some information may have been intentionally excluded.
Therefore, the drawings within this guide may not be an exact duplicate of
the original drawings.
▲
Note Drawings in this manual are included for reference only and may not
be the current version. Contact the factory if you need a copy of the latest
revision. ▲
Table C–1. Installation layout & wiring diagrams
Drawing # Rev. Description Page
868695 A Installation layout, 1400A transmitter to 9719B, 9720B,
9701, 9702 detectors (2 sheets) C–4
868577 D Installation wiring, 9719B/9720B scintillation detectors to
1400A transmitter (3 sheets) C–6
868680-2 B Installation wiring, 1400A/1400S transmitter (3 sheets) C–9
868697 A Installation wiring, 9701/9702 ion chamber detectors to
1400A transmitter (1 sheet) C–12
868519 B RS485 installation and wiring (1 sheet) C–13
Table C–2. Transmitter dimensional drawings
Drawing # Rev. Description Page
868212 F 1400A transmitter dimensional diagram, NEMA 4X
enclosure (2 sheets) C–14
868214 D 1400A transmitter dimensional diagram, NEMA 4/NEMA
7 enclosure (1 sheet) C–16
208-140002 A 1400S transmitter dimensional diagram (1 sheet) C–17
Thermo Fisher Scientific Den Installation Guide C-1