Thermo Scientific DensityPRO NAI Series, User Manual

Page: 58 / 196

Operation
System Status
4
-
6 DensityPRO User Manual Thermo Scientific
System Status
The System Status screen auto-populates with information about the system status,
and information setup of the detector.
To access the information on the System Status screen using only the remote
transmitter keypad, see
Figure A-4 .
Figure 4-4. System Status
– The system level information provides details related to the hardware version,
firmware version and the number of available peripherals in the gauge.
– The detector status gives details about firmware located in the RBP.
The only action the user may take on this screen dictates how the data will be viewed.
1. To capture new, updated information, click the Refresh button.
2. To have the information constantly updating on the screen, check the Auto
Refresh checkbox.
3. To exit the screen, click the Cancel button.