manualshive.com logo in svg

Thermo Scientific DensityPRO NAI Series, User Manual

Share
Download
Thermo Scientific DensityPRO NAI Series User Manual Download Page 36

Startup & the Setup Wizard 

User Modes & Passwords 

3

-

6 

DensityPRO User Manual 

Thermo Scientific 

 

–

 

Technician Mode Count 

–

 

Operator Mode Count 

To access the information on the Password Entry screen using only the remote 
transmitter keypad, see 

Figure A-2

. 

 

Password 

Entry/Validation 

The Password Entry/Validation screen can be accessed either by selecting the screen 
from the Functions dropdown menu at the top of the screen, or by clicking the last 
icon button, which is circled in Figure 3-2. 

 

 

Figure 3-2.

 Password Entry Screen 

The DensityPRO gauges have been previously configured with passwords for Engineer, 
Technician and Operator modes. Currently, Engineer and Display List are the only 
functioning modes. Technician and Operator mode will be available in future software 
releases. 

–

 

To keep passwords hidden by having them display as asterisks onscreen at key-in, 
enable the Display Password Mode field. Disabling this field will show the 
information entered. 

–

 

Enter the password into the User Password Entry textbox to enter Engineer mode. 

 

 

Summary of Contents for DensityPRO NAI Series





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands